New HV Control board installed in program mode.
Model Number: JFI2589AES
Brand: Jenn-Air
Age: 6-10 years
I installed a new control board PN# W10310240 to repair ice/water dispenser problem, which worked. However the control panel displays a blinking "PE0 000" which I've found means the board is in program mode. I can only find Maytag instructions for programming and my Jenn-Air has a different control pad. Random guessing of key presses has only resulted in switching between Ice/water modes of the dispenser.
1 Attachment(s)
Program code entry solved
After a few more hours of experimentation, I was able to divine the key strokes required for entering the program code on my Jenn-Air. The attached PDF is a instruction sheet I wrote up for myself should this repair ever need repeating. Other models with a different code (code is located on serial number plate) would of course have to follow a different number entry sequence. Several threads suggested that having the fridge doors open during programming was required, that was not necessary in my case.
While this problem is solved, this control board has self diagnostic functions that I can see could come in very handy one day if only I knew how to use them with my key pad layout. If anyone locates those instructions I would much appreciate you sharing them.
Attachment 251