When probes are not touching anything I get - O.L -
I'm not remembering the 59v reading
Type: Posts; User: brian5793
When probes are not touching anything I get - O.L -
I'm not remembering the 59v reading
688
Just so we're clear , during testing I'm putting the black fluke probe on the ground / green wire screwed down in front of the bracket in the pic
can you tell from the photos if the wiring is done correctly? you mentioned the black wire didnt look right
im using a fluke 76, when i touch black to ground and red to one of the leads on the coil i get Zero on both leads. If i touch both coil leeds i get 10ohm. if i touch the fluke leeds together i get...
685686687
Hopefully better pics of how it's wired
dryer has been working fine for over a year in same location.
coil to ground on both sides + 0 on each
coil leed to coil leed + 10 ohm ( if that means anything )
i replaced the heater element,...
684
The one thing that is on my mind is what if I didn't put these wires 100% exactly where they were .... Will that cause this and if so how do I know the exact orientation to place them? And is...
at the terminals on the back of the machine not running i got 240v as well as running 240v with 120v on both legs
680681681682683
677678679
Schematic
Here is the schematic
I do have the detailed wiring diagram. If there is a way I can send it to you let me know. I'm testing voltage right at the terminals of the coil in the housing . There is a red and red with white...
what voltage should the red and red w white voltage be while running? i have a 240v dryer and im getting 120 at those 2 contacts. any suggestions?
Model Number: GEW9250PWO
Brand: Whirlpool
Age: 1-5 years
Not blowing hot, no error codes i replaced coil and all fuses and sensors related to coil and blower. Tested wall outlet.. 240v i test...