Search:

Type: Posts; User: denman

Page 1 of 20 1 2 3 4

Search: Search took 0.20 seconds.

  1. Thread: Dryer wont heat

    by denman
    Replies
    9
    Views
    217

    OK Take a look at the Fast Track info in the link...

    OK Take a look at the Fast Track info in the link I gave.
    It gives info on checking the thermistor.
    Do that and if it is OK then odds are high that you need a new control board.
  2. Thread: Dryer wont heat

    by denman
    Replies
    9
    Views
    217

    OK Good. I am using the last diagram in the link...

    OK Good.
    I am using the last diagram in the link of wiring diagram as a reference.
    Unplug the unit and set your meter on it's most sensitive resistance scale.
    Before starting short your meter...
  3. Thread: Dryer wont heat

    by denman
    Replies
    9
    Views
    217

    Check it with the dryer off, Then start the...

    Check it with the dryer off,
    Then start the dryer and check it with the dryer running.
    Just make sure the dryer is set to a heating mode.
  4. I cannot find any tech info on this unit. The...

    I cannot find any tech info on this unit.

    The defrost timers should be up top. All you will probably see is a hole that lets you manually turn the timer cam as it is probably behind a...
  5. Thread: Dryer wont heat

    by denman
    Replies
    9
    Views
    217

    Below is a link to some info. It is for a 5000...

    Below is a link to some info.
    It is for a 5000 unit but should be close to yours.
    https://drive.google.com/drive/folders/0BzIiBNwRIV4Nb0pXTTlDcGlXUWs

    Just because the centrifugal switch can be...
  6. Thread: Dryer wont heat

    by denman
    Replies
    9
    Views
    217

    How did you check the centrifugal switch? Do...

    How did you check the centrifugal switch?

    Do you have the tech sheet/wiring diagram?

    I am assuming that when you ran it without the drum that you had to activate the belt switch manually.
    Is...
  7. Replies
    1
    Views
    127

    Try Sears Parts they show it as In Stock

    Try Sears Parts they show it as In Stock
  8. Replies
    3
    Views
    105

    Sorry but I do not recommend products.

    Sorry but I do not recommend products.
  9. Replies
    3
    Views
    105

    Below is a link to info on this unit...

    Below is a link to info on this unit
    http://b2b.frigidaire.com/support/ResultsPage.asp?strModel=LFFH17F7HWH&User=&Search=Search

    Double check that the compressor is running. You can usually hear...
  10. Replies
    3
    Views
    100

    Info on the LED is in the tech sheet

    Info on the LED is in the tech sheet
  11. Replies
    3
    Views
    100

    Here is the tech sheet in case you do not have...

    Here is the tech sheet in case you do not have it,
    https://drive.google.com/file/d/0BzIiBNwRIV4NaXMtTjlhM1AzRlE/view

    Also here is a service manual whuich says it covers your unit....
  12. Replies
    1
    Views
    127

    A model number would be useful. The overflow...

    A model number would be useful.

    The overflow sensor should have no effect on the door switches.
  13. Replies
    3
    Views
    113

    As far as I know there is not any circuitry that...

    As far as I know there is not any circuitry that keeps the lights on.

    I still stand by my earlier post.
    If you have checked the wiring I would replace the switch!!!
  14. You are welcome. I hope it turns out OK for...

    You are welcome.

    I hope it turns out OK for you!!!
  15. Below is a link to a service manual...

    Below is a link to a service manual
    https://drive.google.com/file/d/0BzIiBNwRIV4NTHpVX2xRN3VZWkE/view

    Yes the unit knows when to defrost see the following.
    ...
  16. Replies
    3
    Views
    113

    Below is a service manual...

    Below is a service manual
    https://drive.google.com/file/d/0BzIiBNwRIV4NMWRsRFVlX3dZOEk/view

    I do not know what you mean by cleaning the door switches.
    But since that worked for a couple days I...
  17. Thread: Whirlpool

    by denman
    Replies
    4
    Views
    197

    Here is a link to a tech sheet that may be useful...

    Here is a link to a tech sheet that may be useful to you.
    https://www.pwslaundry.com/files/docs/maytag-whirlpool/Tech-Sheet-W10238795-Rev-B.pdf
    Unfortunately I cannot find a service manual.

    Yes ...
  18. Thread: Whirlpool

    by denman
    Replies
    4
    Views
    197

    Check the front and back of the drum seals with...

    Check the front and back of the drum seals with your fingers.
    Be careful in case the something is sharp.
    Bra wires are notorious at getting stuck between the felt seals and the drum.
  19. I cannot suggest a part as you have to do more...

    I cannot suggest a part as you have to do more investigation.
    Remove the cover panel at the back of the freezer so you can inspect the evaporator coils.

    If they are heavily frosted over then odds...
  20. Following is info on this unit...

    Following is info on this unit
    http://b2b.frigidaire.com/support/ResultsPage.asp?strModel=FFEF3005MWB&User=&Search=Search

    Sounds like the thermostat is shot.

    Not sure why you mention the...
  21. Replies
    2
    Views
    150

    The following should help....

    The following should help.
    https://drive.google.com/file/d/11qwL5uke31af46uKOZL8NMCpBHu3ZJ0o/view?usp=sharing
  22. Replies
    1
    Views
    166

    Below is a link to a manual that may help. I...

    Below is a link to a manual that may help.
    I cannot find a service manual for your exact model.
    https://drive.google.com/drive/folders/0BzIiBNwRIV4NV1ZxdzBFRkNmUEE

    Below is a link for your exact...
  23. Replies
    3
    Views
    180

    I think the c stands for a Canadian model and I...

    I think the c stands for a Canadian model and I cannot find any info on it.
    Look in the control console perhaps the tech sheet is there.

    Does sound like a timer problem.

    What does it do in an...
  24. Replies
    3
    Views
    180

    Kenmore puts their name on hundreds if not...

    Kenmore puts their name on hundreds if not thousands of dryers, need a model number.
  25. Replies
    24
    Views
    623

    You are welcome, glad to hear that you are up and...

    You are welcome, glad to hear that you are up and running
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4