Search:

Type: Posts; User: brian5793

Search: Search took 0.00 seconds.

  1. Replies
    20
    Views
    1,580

    When probes are not touching anything I get -...

    When probes are not touching anything I get - O.L -
    I'm not remembering the 59v reading
  2. Replies
    20
    Views
    1,580

    688 Just so we're clear , during testing I'm...

    688
    Just so we're clear , during testing I'm putting the black fluke probe on the ground / green wire screwed down in front of the bracket in the pic
  3. Replies
    20
    Views
    1,580

    can you tell from the photos if the wiring is...

    can you tell from the photos if the wiring is done correctly? you mentioned the black wire didnt look right
  4. Replies
    20
    Views
    1,580

    im using a fluke 76, when i touch black to ground...

    im using a fluke 76, when i touch black to ground and red to one of the leads on the coil i get Zero on both leads. If i touch both coil leeds i get 10ohm. if i touch the fluke leeds together i get...
  5. Replies
    20
    Views
    1,580

    685686687 Hopefully better pics of how it's wired

    685686687
    Hopefully better pics of how it's wired
  6. Replies
    20
    Views
    1,580

    dryer has been working fine for over a year in...

    dryer has been working fine for over a year in same location.
    coil to ground on both sides + 0 on each
    coil leed to coil leed + 10 ohm ( if that means anything )
    i replaced the heater element,...
  7. Replies
    20
    Views
    1,580

    684 The one thing that is on my mind is what if...

    684
    The one thing that is on my mind is what if I didn't put these wires 100% exactly where they were .... Will that cause this and if so how do I know the exact orientation to place them? And is...
  8. Replies
    20
    Views
    1,580

    at the terminals on the back of the machine not...

    at the terminals on the back of the machine not running i got 240v as well as running 240v with 120v on both legs
  9. Replies
    20
    Views
    1,580

    680681681682683

    680681681682683
  10. Replies
    20
    Views
    1,580

    677678679 Schematic

    677678679
    Schematic
  11. Replies
    20
    Views
    1,580

    Here is the schematic

    Here is the schematic
  12. Replies
    20
    Views
    1,580

    I do have the detailed wiring diagram. If there...

    I do have the detailed wiring diagram. If there is a way I can send it to you let me know. I'm testing voltage right at the terminals of the coil in the housing . There is a red and red with white...
  13. Replies
    2
    Views
    5,145

    Sticky: what voltage should the red and red w white...

    what voltage should the red and red w white voltage be while running? i have a 240v dryer and im getting 120 at those 2 contacts. any suggestions?
  14. Replies
    20
    Views
    1,580

    240v dryer but 120v at coil

    Model Number: GEW9250PWO
    Brand: Whirlpool
    Age: 1-5 years

    Not blowing hot, no error codes i replaced coil and all fuses and sensors related to coil and blower. Tested wall outlet.. 240v i test...
Results 1 to 14 of 14