A model number would be useful.
Most common cause is a plugged vent.
Also could be a grounded element of plugged/dirty dryer.
Type: Posts; User: denman
A model number would be useful.
Most common cause is a plugged vent.
Also could be a grounded element of plugged/dirty dryer.
OK Take a look at the Fast Track info in the link I gave.
It gives info on checking the thermistor.
Do that and if it is OK then odds are high that you need a new control board.
OK Good.
I am using the last diagram in the link of wiring diagram as a reference.
Unplug the unit and set your meter on it's most sensitive resistance scale.
Before starting short your meter...
Check it with the dryer off,
Then start the dryer and check it with the dryer running.
Just make sure the dryer is set to a heating mode.
I cannot find any tech info on this unit.
The defrost timers should be up top. All you will probably see is a hole that lets you manually turn the timer cam as it is probably behind a...
Below is a link to some info.
It is for a 5000 unit but should be close to yours.
https://drive.google.com/drive/folders/0BzIiBNwRIV4Nb0pXTTlDcGlXUWs
Just because the centrifugal switch can be...
How did you check the centrifugal switch?
Do you have the tech sheet/wiring diagram?
I am assuming that when you ran it without the drum that you had to activate the belt switch manually.
Is...
Try Sears Parts they show it as In Stock
Sorry but I do not recommend products.
Below is a link to info on this unit
http://b2b.frigidaire.com/support/ResultsPage.asp?strModel=LFFH17F7HWH&User=&Search=Search
Double check that the compressor is running. You can usually hear...
Info on the LED is in the tech sheet
Here is the tech sheet in case you do not have it,
https://drive.google.com/file/d/0BzIiBNwRIV4NaXMtTjlhM1AzRlE/view
Also here is a service manual whuich says it covers your unit....
A model number would be useful.
The overflow sensor should have no effect on the door switches.
As far as I know there is not any circuitry that keeps the lights on.
I still stand by my earlier post.
If you have checked the wiring I would replace the switch!!!
You are welcome.
I hope it turns out OK for you!!!
Below is a link to a service manual
https://drive.google.com/file/d/0BzIiBNwRIV4NTHpVX2xRN3VZWkE/view
Yes the unit knows when to defrost see the following.
...
Below is a service manual
https://drive.google.com/file/d/0BzIiBNwRIV4NMWRsRFVlX3dZOEk/view
I do not know what you mean by cleaning the door switches.
But since that worked for a couple days I...
Here is a link to a tech sheet that may be useful to you.
https://www.pwslaundry.com/files/docs/maytag-whirlpool/Tech-Sheet-W10238795-Rev-B.pdf
Unfortunately I cannot find a service manual.
Yes ...
Check the front and back of the drum seals with your fingers.
Be careful in case the something is sharp.
Bra wires are notorious at getting stuck between the felt seals and the drum.
I cannot suggest a part as you have to do more investigation.
Remove the cover panel at the back of the freezer so you can inspect the evaporator coils.
If they are heavily frosted over then odds...
Following is info on this unit
http://b2b.frigidaire.com/support/ResultsPage.asp?strModel=FFEF3005MWB&User=&Search=Search
Sounds like the thermostat is shot.
Not sure why you mention the...
The following should help.
https://drive.google.com/file/d/11qwL5uke31af46uKOZL8NMCpBHu3ZJ0o/view?usp=sharing
Below is a link to a manual that may help.
I cannot find a service manual for your exact model.
https://drive.google.com/drive/folders/0BzIiBNwRIV4NV1ZxdzBFRkNmUEE
Below is a link for your exact...
I think the c stands for a Canadian model and I cannot find any info on it.
Look in the control console perhaps the tech sheet is there.
Does sound like a timer problem.
What does it do in an...
Kenmore puts their name on hundreds if not thousands of dryers, need a model number.