Search:

Type: Posts; User: cewillis

Search: Search took 0.00 seconds.

  1. Replies
    12
    Views
    1,195

    Yes -- I figured out that the main controller...

    Yes -- I figured out that the main controller board was shot, as explained in the first post. Must be - the MCB was still supplying voltage to the inlet valve (thus putting in more water) when it...
  2. Replies
    12
    Views
    1,195

    Along the front lip. You can tell from picture 2...

    Along the front lip. You can tell from picture 2 that the DW is level. Yes, I have replaced the seal around the door, and the 'seal' along the bottom of the door.
    Do you still agree there is too...
  3. Replies
    12
    Views
    1,195

    As mentioned in first post Isn't this...

    As mentioned in first post


    Isn't this testing the valve as you suggest? And also verified that the controller is still trying to add water even after the float switch opens.

    Thanks for...
  4. Replies
    12
    Views
    1,195

    I understand that -- and it works that way for...

    I understand that -- and it works that way for the first 53 seconds. Then the 'safety device' has no effect while the dishwasher continues to (over)fill with water.
  5. Replies
    12
    Views
    1,195

    Thank you very much for the reply. And the tech...

    Thank you very much for the reply. And the tech sheet, which I will study carefully.
    It does look like the spray arms are almost submerged, but they are really 1/4-3/8" above the water.
    In normal...
  6. Replies
    12
    Views
    1,195

    Kitchenaid -- too much water causes leak

    Model Number: KUDS30IXBL1
    Brand: KitchenAid
    Age: 6-10 years

    I think my dishwasher controller is causing too much water fill and subsequent leaks. The pictures show the water level immediately...
Results 1 to 6 of 6