Per the above information about thermostats, "Both thermostats on the heater should be 0 ohms." Can someone clarify these readings on mine: Both thermostats have continuity. Both thermostats are...
Type: Posts; User: Osa Johnson
Per the above information about thermostats, "Both thermostats on the heater should be 0 ohms." Can someone clarify these readings on mine: Both thermostats have continuity. Both thermostats are...
Yes, 240 is seriously serious. Thanks for your help! I did a live test of voltage at the heating element to ground and got 123 from each leg. I will check the wires you suggested - not as a Live...
Thanks denman! I am still trying!
Electronics control board has proper resistance at the control board P4-3 and P4-6.
So now, I have gone through the entire Tech sheet for "Dryer running but...
Per the PartsDr. videos I've tested my heater system for continuity: - thermal cut-off, Hi Limit thermostat, heater all have continuity. I'm a bit confused about the role that the resistance numbers...
Thank you for your reply Denman! :) Yes, I've cycled the breaker, I've checked the power - 240 at receptacle, 240 at terminal strip. I'm new to multimeters but have watched the PartsDr. Videos...
Hi - Fixers. Please please help me!!! I am new to the forum and I hope if I am posting to the wrong place someone will let me know so I can get my post to the right eyes and my dryer fixed. I am...
Hi Fixers, My Kenmore Elite is not heating. I've got not error codes showing. I've checked the heater coil - have continuity; thermostat - continuity; hi-limit - continuity; thermistor - 13 ohms at...