Results 1 to 9 of 9

Thread: Maytag high voltage control board programming not taking

  1. #1

    Maytag high voltage control board programming not taking

    Model Number: 12920710
    Brand: Maytag
    Age: 1-5 years [b]

    I just got my control board 12920710. I installed it and tried to program it. I go through the steps okay and get to the part where it now says PE1 411 and there is a "." at the end showing that is the last digit entered. Then when I push and hold the freezer - button it just beeps and doesn't do anything. It continues to show the PE1 411 with the "." at the end. I don't think it's accepting it. But it is definitely the Code 1411 on the inside of my frigerator.

    I am doing all this with the doors open as suggested. HELP?
    Attached Thumbnails Attached Thumbnails controlboard.jpg  

  2. #2
    Unless any DR experts can help I'm going with another solution. the code in my fridge says 1411 and that doesn't seem to be working. I did some Google searching and found someone else who tried 0302 and that worked for them. So I went ahead and tried to enter 0302 and then hit the dash symbol for the down on the freezer. It did except the code and then showed zero and 38 as my degrees. That article also said after you do this you should unplug the frigerator for 10 seconds and then plug it back in for the compressor to start. Everything seemed to work fine and now my stuff is freezing and frigerator is cooling off. But why the heck would the original code in my frigerator of 1411 not work. Some expert should know.

  3. #3
    Okay, although the refrigerator and freezer are working the ice maker is not working. Does anyone still have any ideas on why the original code wouldn't work.

  4. #4

    Any experts have anything on this???

    Have not heard from anyone. Arent there any experts that have ideas on why this is happening.
    Quote Originally Posted by cmschu View Post
    Okay, although the refrigerator and freezer are working the ice maker is not working. Does anyone still have any ideas on why the original code wouldn't work.

  5. #5
    Admin/Technician Doc Ryan's Avatar
    Join Date
    Mar 2011
    Location
    South Dakota
    Posts
    3,530
    Yes I do know why you are having issues. The control board that you order is not the correct one for your serial number refrigerator. The correct control board for your model and serial number is part number W10310240. See the link below.

    High Voltage Control Board - W10310240
    Ryan
    www.PartsDr.com - Discount Appliance Parts & Accessories

    Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.

    Circle Parts Dr On Google+

    "Like" Parts Dr on Facebook


    Follow Parts Dr on Twitter

  6. #6
    Admin/Technician Doc Ryan's Avatar
    Join Date
    Mar 2011
    Location
    South Dakota
    Posts
    3,530
    You have to search by model number MFI2568AES12 because of your serial number to locate the correct parts for your model and serial number.
    Ryan
    www.PartsDr.com - Discount Appliance Parts & Accessories

    Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.

    Circle Parts Dr On Google+

    "Like" Parts Dr on Facebook


    Follow Parts Dr on Twitter

  7. #7

    New board not taking 1411 code

    Quote Originally Posted by cmschu View Post
    Have not heard from anyone. Arent there any experts that have ideas on why this is happening.
    Hi there is your fridge is working now. I had the same problem that you had. Which board did you change?
    Thanks

  8. #8
    Hi
    I had the same issue. I got the same board 12920710, and it wouldnt take the code 1411. I tried 0302 as suggested here, and it worked. Everything seems to work, water dispenser/fridge/freezer. i dont use the ice despenser, so not sure about that. Has anyone who has tried this 0302 code in a maytag that wanted the 1411 code had any adverse issues?

  9. #9
    Quote Originally Posted by Doc Ryan View Post
    You have to search by model number MFI2568AES12 because of your serial number to locate the correct parts for your model and serial number.
    Hello, I am in the same boat. I had to replace the HV board due to the flashing lights and flapping of the ice dispenser. The parts store said I needed 12920710 (replacing 12920717). I changes the board, the fridge came alive yay, but it wold not accept my code 1411 on my fridge tag. I used 0302 and it was accepted, but no water filling the ice maker.

    I just want to be absolutely sure that I need to use MFI2568AES(12) rather than just MFI2568AES when searching? When I use the suffix 12 I get W10310240 as the correct board, but doesn't list my fridge?

    I can only return the board once, so I just want to be clear I have the wrong board and the W10310240 is the correct one.

    My serial number begins with 12.

Similar Threads

  1. Replace control panel/touchpad or control board?
    By Grayrider in forum Dishwasher Repair
    Replies: 1
    Last Post: 09-05-2013, 12:04 PM
  2. Can't program high voltage board
    By Kevpilot in forum Refrigerator or Freezer Repair
    Replies: 6
    Last Post: 01-08-2013, 01:10 PM
  3. programming control panel
    By andyft in forum Refrigerator or Freezer Repair
    Replies: 6
    Last Post: 12-14-2012, 06:26 PM
  4. Control Board W10503278 Programming Instructions
    By packrat in forum Refrigerator or Freezer Repair
    Replies: 1
    Last Post: 10-12-2012, 03:00 PM
  5. Need Help in accessing the Adaptive Defrost Control Board on our Maytag refrigerator
    By sp0008@binghamton.edu in forum Refrigerator or Freezer Repair
    Replies: 6
    Last Post: 06-28-2012, 07:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •