[FIXED] Dryer starts then stop

[ski]

Model Number: DV328AER/XAA
Brand: Samsung
Age: 1-5 years

Yes I have a code coming up on dryer its (do) I know this is door open I have replaced the switch 4 this still same thing
Starts then quickly stops and do still come up I have checked cords fuse all seem to bee fine dryer does all other things correct light comes on when door open only thing I can think of is the pcb thanks any help will be appreciated

[Doc Ryan]

If the dryer thinks the door is open, when it is closed then there are usually a few different things that will cause this type of problem. The door switch, wiring, or control board. You already know the door switch is good if you replaced it with a new one, so that leaves you with a wiring issue or a bad control board. You will have to look at the schematic on the dryer, but this would usually be controlled by the main control board.

This is the main control board for your model dryer:

Main Control Board - MFS-DV327L-00

[ski]

Thank you very much. I came up with the same thing and just wanted to make sure before I went and bought the part. Good thing too, you guys are cheaper then the one I found. So thanks for that too.

[Doc Ryan]

Let us know how the repair goes.

[ski]

Thanks again yes this solves the problem and wow on next day delivery on the part outstanding performance will tell anyone to check out this site if they have problems. Thanks again

[Doc Ryan]

Thanks for the update. I updated the status of this thread to FIXED. Thank you for your business too