Model Number: Wa456drhdsu/aa
Brand: Samsung
Age: 1-5 years
Started getting intermittent 3e when running. Would work after unplugging for bit and restarting. Then just completely stopped. Went to quick test to test motor and received a 3e2 code immediately. Tested resistance at motor connectors. It was around 10ohms. Manual said 11.4. Don't know if that is too low or what. Also hall sensor seemed to check out. Was told by Samsung customer service chat that the motor would need to be replaced. So naturally I started to remove it. Noticed that there was some back and forth play in the shaft the motor mounts to coming from the clutch assembly. I'm thinking the PCB as far as the 3e2 error code. But is that shaft supposed to have play in it or do I need clutch assembly also