Model Number: JTP18Aw2aa
Brand: GE
Age: More than 10 years
Hello. This is a GE profile. About a year ago the control panel (electronics) and the key pad were replaced. The control panel was replaced with a rebuilt one and the key pad was replaced with new.
Current situation: All functions are working properly except self clean. When putting in self clean mode - you push the self clean button, then hit start. After hitting start, the DOOR light comes on then the Lock button keeps blinking. A beeper beeps as well. The door does not lock. You can hear a relay clicking on and off as well.
I removed the panel and validated the lock switch. It has about 5M ohms resistance open and 0 ohms closed. I even bypassed it as a double check. The lock motor never came on/oscilated. Even so, I would think with the lock switc closed/bypassed, if that were the issue, self clean mode should have come on.
Any thoughts?