Model Number: GLEQ2152ES0
Brand: Frigidaire
Age: 6-10 years
Initially I had a problem with an E68 code and the dryer display coming on by itself and peeping while displaying the E68. The buttons (start and Pause/cancel) did not appear stuck, but not as responsive as the other buttons. I took apart the control panel. Stretched the springs back to the length of the other more responsive buttons. Now all buttons respond crisply. Once I put the control panel back together. Now all the dryer display wants to do is flash the display (time displayed is appropriate for the cycle) and the time displayed will change according to cycle selected. In addition, the "moderate hot" air temp flashes and the "finish signal" light flashes. Sorry if these are not the exact names, am not able to look at the dryer as I submit this post. The start and pause/cancel buttons seem to have no influence on what dryer does. I ordered a new control board from PartsDr, replaced the board. Same exact problem with flashing display. Prior to this issue, the dryer worked flawlessly. I regularly clean the vent hose and use the dryer 3-5 times per week.
What is my next step?