Model Number: lsb6000pq2
Brand: Whirlpool
Age: 6-10 years
I just replaced the gear and pinion in the transmission because the gear was stripped. Now, when I run a load the spin cycle does not engage. It makes a humming noise as if it is attempting to spin. I raise the lid and hear the humming slow down and when it is almost stopped it moves the basket slightly and clicks as if the brake then becomes engaged. When I lower the lid it will then spin normally. It seems as if something is not engaging the brake after the agitate and rinse mode. When I raise and lower the lid it will then work every time. I dont think it is the clutch as I just replaced that and the coupler 3 months ago. I inspected both when working on the transmission and both are in great condition and functioning fine.