Model Number: KUDM01FK
Brand: KitchenAid
Age: More than 10 years
Have a problem with my 12 yr old Kitchenaid KUDM01FK stainless steel version. The control panel Rinse LED flashes, pressing Cancel illuminates cancel light. Other than that dishwasher does not start. Removed power for 5 mins, tried the reset sequence- makes no diff. I suspect the control board or keypad. Here is what I did so far:
I took board and keypad out. With an ohm meter I tested continuity on all switches on keypad; all show open and when key pressed show closed so no stuck keys; I also checked all diodes and all are operating correct (blocked one way and open the other way when tested with + and - leads of ohm meter).
I checked continuity present correctly on ribbon cable between keypad and control board and cable checked out fine.
Is there anything else I should check before I say for sure its the control board? (I ordered one anyways from PartDr; may as well replace with the new version). There is no tech sheet behind kick panel. Any link to one would be appreciated as well.
Thanks for any inputs/insights,
S