Model Number:
Brand: Whirlpool
Age: 1-5 years
My Whirlpool Duet washer has water sitting in tub every morning. It drains completely after a wash cycle. It looks like it could be a Water Valve issue? What are your thoughts?
Model Number:
Brand: Whirlpool
Age: 1-5 years
My Whirlpool Duet washer has water sitting in tub every morning. It drains completely after a wash cycle. It looks like it could be a Water Valve issue? What are your thoughts?
Yes, if the washer is slowly filling up with water when the washer is not running, then the water inlet valve has a slow leak and it will need to be replaced. If you can get the model number from the tag on the door frame of the washer, I can look up the part number for you.
Ryan
PartsDr.com - Discount Appliance Parts & Accessories
Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.
Check out our Repair Videos on Youtube
"Like" Parts Dr on Facebook
Follow Parts Dr on Twitter
Doc, thanks for your response. My model is GHW9400PL4.
This is the water valve for your washer. To replace it, shut off the water and remove the hot & cold hoses, unplug the washer, remove the top panel, unplug the wire connectors, remove the clamp & outlet hose, and remove the mounting screws. Swap in the new valve, and reinstall in the reverse order. Please let us know if you have any questions.
Water Inlet Valve - PD00003431 (mfg# 8182862)
Ryan
PartsDr.com - Discount Appliance Parts & Accessories
Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.
Check out our Repair Videos on Youtube
"Like" Parts Dr on Facebook
Follow Parts Dr on Twitter
My whirlpool front loader washing machine is doing the same thing. Can you tell me the part number of the inlet valve that I need? My model number is ghw9300pw4. Serial number is cst2819185. Thank you for your help.
Your model uses part number 8182862 for the water valve. You can click the link below.
Water Inlet Valve - PD00003431 (mfg# 8182862)
Ryan
PartsDr.com - Discount Appliance Parts & Accessories
Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.
Check out our Repair Videos on Youtube
"Like" Parts Dr on Facebook
Follow Parts Dr on Twitter
I have the same problem, Doc. I have Whirlpool Thin Twin, model number LTG5243BNO.
This is the water valve for your model washer:
Water Inlet Valve - Part # PD00002373 (mfg # 285805)
Ryan
PartsDr.com - Discount Appliance Parts & Accessories
Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.
Check out our Repair Videos on Youtube
"Like" Parts Dr on Facebook
Follow Parts Dr on Twitter
I believe I also have a water inlet valve that needs repairing or replacing in my Whirlpool Duet. (Slow leak inside washer and filled after several hours not in use). In the meantime of fixing it, can I use my washer as long as I turn off the water supply when it's not in use? This may take several days for me to finally be able to fix. Thanks!
This is the water valve for your model washer:
Water Inlet Valve - Part# PD00002389
Ryan
PartsDr.com - Discount Appliance Parts & Accessories
Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.
Check out our Repair Videos on Youtube
"Like" Parts Dr on Facebook
Follow Parts Dr on Twitter
I am having the same issue. Would this also explain an F26 error message? My model number is WFW9200SQ02. Thanks, so glad I found this forum.
The F26 Error is most likely unrelated to the the other problem. See the information below.
This is the water inlet valve for your model washer:F26 - Door Switch Error
If the door has not been opened for 3 consecutive cycles or the door switch is open while the door is locked for more than 5 seconds.
Water Inlet Valve - PD00003431 (mfg# 8182862)
Ryan
PartsDr.com - Discount Appliance Parts & Accessories
Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.
Check out our Repair Videos on Youtube
"Like" Parts Dr on Facebook
Follow Parts Dr on Twitter
I have a Samsung WF405ATPA front loading washer. After it sits unused water pools in the drum. Do you think it is a failed inlet valve & if so can you provide the part number?
Ryan
PartsDr.com - Discount Appliance Parts & Accessories
Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.
Check out our Repair Videos on Youtube
"Like" Parts Dr on Facebook
Follow Parts Dr on Twitter
This is the water inlet valve for your model washer:
Water inlet valve - PD00005863 (mfg# W10156253)
Ryan
PartsDr.com - Discount Appliance Parts & Accessories
Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.
Check out our Repair Videos on Youtube
"Like" Parts Dr on Facebook
Follow Parts Dr on Twitter