Model Number: G868
Brand: Brand
Age: 6-10 years
Hi There,
This may not be the most appropriate thread to ask this question, but here it goes.
I have a Meile G868 dishwasher that developed very low circulation water pressure. Before taking it apart, I ran it with door open (activating the door switch). I confirmed there was water pressure, but very low, only enough to spin the washer arms very slowly. I confirmed there was enough water. I took it apart, confirmed there was nothing obstructing the water flow in all the plumbing. Then I removed the circulation pump motor. It was then evident that the motor has started to seize. So, rather than replace the motor ($500 + shipping and taxes), I'd like to replace the bearing. My problem is that I can't get the impeller off in order to get to the bearing. Here are a couple of pictures. You can see the impeller. I need to remove this in order to get to the inside bearing. Any ideas how to do this?
Thanks