Results 1 to 4 of 4

Thread: Maytag Neptune smoking during spin cycle

  1. #1

    Maytag Neptune smoking during spin cycle

    Model Number: MAH8700AWW
    Brand: Maytag
    Age: 6-10 years

    My Maytag Neptune started smoking today during the spin cycle. When I run it with nothing in it it doesn't seem to smoke, only with a load in it. The drive belt looks OK visually, but may be a little loose. I have not tried to run it with the back off to see if that is where the smoke is coming from, but it appeared to be the case when it was running. Any ideas?

  2. #2
    Admin/Technician Doc Ryan's Avatar
    Join Date
    Mar 2011
    Location
    South Dakota
    Posts
    4,255
    Does the washer seem noisy during the spin cycle?
    Ryan

    PartsDr.com
    - Discount Appliance Parts & Accessories


    Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.

    Check out our Repair Videos on Youtube

    "Like" Parts Dr on Facebook


    Follow Parts Dr on Twitter

  3. #3
    Quote Originally Posted by duffmeister007 View Post
    Model Number: MAH8700AWW
    Brand: Maytag
    Age: 6-10 years

    My Maytag Neptune started smoking today during the spin cycle. When I run it with nothing in it it doesn't seem to smoke, only with a load in it. The drive belt looks OK visually, but may be a little loose. I have not tried to run it with the back off to see if that is where the smoke is coming from, but it appeared to be the case when it was running. Any ideas?
    I'm not getting any noise out of it at all. Everything sounds and seems normal, except for the smoke in the spin cycle.

  4. #4
    Admin/Technician Doc Ryan's Avatar
    Join Date
    Mar 2011
    Location
    South Dakota
    Posts
    4,255
    I am not sure what would be causing the smoke. If the belt were slipping and smoking it should have some signs of wear on it. I would also take a look at the inner tub of the washer to see if it looks like it is rubbing on the front door gasket or the front outer tub.
    Ryan

    PartsDr.com
    - Discount Appliance Parts & Accessories


    Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.

    Check out our Repair Videos on Youtube

    "Like" Parts Dr on Facebook


    Follow Parts Dr on Twitter

Similar Threads

  1. Maytag Neptune help?
    By littlesammyjoe in forum Dryer Repair
    Replies: 1
    Last Post: 10-09-2014, 11:02 AM
  2. Replies: 1
    Last Post: 08-08-2014, 10:29 AM
  3. Maytag top load agitator locks up after spin cycle
    By jasper07481 in forum Washer Repair
    Replies: 1
    Last Post: 07-31-2014, 12:03 PM
  4. Maytag Neptune washer loud noise in spin cycle
    By Laner in forum Washer Repair
    Replies: 3
    Last Post: 02-09-2014, 12:42 PM
  5. Washer won't go to spin cycle
    By Maryscat in forum Washer Repair
    Replies: 8
    Last Post: 04-11-2013, 07:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •