Washing Machine Leaks ONLY When Set to SUPER.

[whalensdad]

Model Number: LAT8826AAE
Brand: Maytag
Age: More than 10 years

I have a Maytag Washer, LAT8826AAE, that leaks from the tub seal ONLY when the water level is set to SUPER. It pours out like crazy. If I set the water level setting to Large or less then there is no leakage whatsoever. I replaced the tub seal 4 to 6 years ago. That's not to say the tub seal is bad, but I'm confused as to why it would ONLY leak at the SUPER fill setting. Any suggestions on what I should replace?

[Doc Ryan]

My guess would be that it is just better more stress on the seal with more water in the tub that is causing it to leak. When you replace the seal previously did you use an OEM part and did you also replace the bearing at the same time? We have seen some people have bad luck trying to save a couple of bucks by use aftermarket seal and bearing kits on these washers.

These are the parts for your model washer:

Tub Stem and Seal Kit - Part # PD00002517 (mfg # 6-2095720)


Tub Bearing Kit - Part # PD00002520 (mfg # 6-2040130)