KitchenAid control board programming

[snoopyoo1]

Model Number: kfcs22evms4
Brand: KitchenAid
Age: 1-5 years

Bought and installed W10120827 for kfcs22evms4. S/N is K03674092. What is the procedure to program the board? It shows PE 000. I need to get it to control setting 01. I also replaced W10116216 but not the overlay. The buttons do not respond to anything I have tried and it does not beep either. Help please.

[snoopyoo1]

Model Number: kfcs22evms4
Brand: KitchenAid
Age: 1-5 years

Bought and installed W10120827 for kfcs22evms4. S/N is K03674092. What is the procedure to program the board? It shows PE 000. I need to get it to control setting 01. I also replaced W10116216 but not the overlay. The buttons do not respond to anything I have tried and it does not beep either. Help please.

More on the prob: Dig Display - Refridg showd 33. Freez side showed Fd. I never found an error description for Fd. So, I still don't know what that means. Freezer was super cold. Fridge was freezing milk. damper was operating and keeping everything COLD.

I ordered the overlay. w10317133. lots of $$$ into this now. I'm sure that I will still need the programming procedure so if anyone can advise on that, I would surely appreciate. Thx.

[Doc Ryan]

Please see the attached PDF instruction sheet below. It looks like the "FD" that you were receiving was Forced Defrost mode. Let me know if these instructions work for you.