Model Number: GEW9250PW1
Brand: Whirlpool
Age: More than 10 years
Looking for some help with a thermal cut-off that keeps failing. Initially had an issue with the heating element not getting warm. I had replaced the thermostat, fuse, thermal cut off and heating element. Also cleaned out the dryer vent. The dryer worked well for 10 days. Then the element stopped heating up. I checked over the fuse, etc and found the thermal cut-off had failed. I replaced the cut-off. The dryer worked for about 7-10 loads and has failed again.
Anyone have any suggestions of what to check next?