Results 1 to 6 of 6

Thread: Samsung Dryer "Cooling" flashes during entire cycle

  1. #1

    Samsung Dryer "Cooling" flashes during entire cycle

    Model Number: DV330AEW
    Brand: Samsung
    Age: 1-5 years

    I have a five year old electric Samsung dryer that had quit getting hot during cycles. The "Cooling" light would flash on during the entire cycle. After reading through these forums, I replaced the heating element (quite easily thanks to the guidance I found here) and the dryer gets hot and drys clothes perfectly fine. However the "Cooling" light remains flashing on during the entire cycle, not matter whether I use a Manual or Sensor drying mode. I pulled out the moisture sensors, cleaned them up and verified the connections are good. Any thoughts? I can order replace sensors if needed. But I'm wondering if there is some sort of "reset" that may get rid of the cooling light issue?

    Thanks for the all of the help!

  2. #2
    Admin/Technician Doc Ryan's Avatar
    Join Date
    Mar 2011
    Location
    South Dakota
    Posts
    4,264
    What does the "Cooling" light do when you run the dryer on the "Air Fluff" cycle?
    Ryan

    PartsDr.com
    - Discount Appliance Parts & Accessories


    Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.

    Check out our Repair Videos on Youtube

    "Like" Parts Dr on Facebook


    Follow Parts Dr on Twitter

  3. #3
    I misspoke previously. The 'Cooling" light stays on consistently during the drying cycle. On the "Air Fluff" cycle, it flashes.

  4. #4
    Admin/Technician Doc Ryan's Avatar
    Join Date
    Mar 2011
    Location
    South Dakota
    Posts
    4,264
    Does the dryer seem to function okay?
    Ryan

    PartsDr.com
    - Discount Appliance Parts & Accessories


    Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.

    Check out our Repair Videos on Youtube

    "Like" Parts Dr on Facebook


    Follow Parts Dr on Twitter

  5. #5
    As far as I can tell, it is functioning fine. It may not be a big deal. Just wanting to make sure I didn't cause some other issue when replacing the heating element.

  6. #6
    Admin/Technician Doc Ryan's Avatar
    Join Date
    Mar 2011
    Location
    South Dakota
    Posts
    4,264
    I am not sure how that light should normally act on this dryer. If the dryer seems to be functioning okay, then it is probably fine.
    Ryan

    PartsDr.com
    - Discount Appliance Parts & Accessories


    Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.

    Check out our Repair Videos on Youtube

    "Like" Parts Dr on Facebook


    Follow Parts Dr on Twitter

Similar Threads

  1. Replies: 5
    Last Post: 07-10-2016, 11:45 PM
  2. Dryer won't start displays "clean lint filter"
    By Fbombs in forum Dryer Repair
    Replies: 1
    Last Post: 03-02-2016, 04:59 PM
  3. Samsung Dryer - Timer runs fast on "Normal" Setting
    By bnlauren in forum Dryer Repair
    Replies: 1
    Last Post: 01-05-2016, 09:38 PM
  4. Replies: 1
    Last Post: 08-02-2015, 06:00 PM
  5. Samsung refrigerator RB1944SL not cooling, error code "d"
    By Lance Greentree in forum Refrigerator or Freezer Repair
    Replies: 1
    Last Post: 08-08-2012, 10:01 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •