[FIXED] Samsung dryer does one load and then will not restart

[heavyg]

Model Number: dv328aew/xaa
Brand: Samsung
Age: 1-5 years

I have a Samsung dryer that I recently replaced the thermistor in and now it will dry one load but then will not re-start for the next load for approximately 30 minutes. Then it will start and properly dry another load and then will not re-start for another 30 minutes. Wife is driving me crazy. Anybody no which part needs to be replaced next?

[Doc Ryan]

What occurs when the dryer won't start? Does the dryer ever stop in the middle of the cycle?

[heavyg]

The lights are on but nothing happens when you push start.
After 30/45 minutes you can push start and it will work for another load and then it rests for another 30/45 minutes.
It did stop mid cycle until I replaced the thermistor.

[Doc Ryan]

When it is acting up you will have to do some testing to see if the main control board is sending power to the motor. I sent you a PM with a link to the service sheet that should help you.

[heavyg]

When it is acting up you will have to do some testing to see if the main control board is sending power to the motor. I sent you a PM with a link to the service sheet that should help you.

Replaced board seems to be working fine. Thanks for the info.

[Doc Ryan]

Thank you for letting us know. I have updated the status of this thread to FIXED.