Originally Posted by
denman
I am assuming that the stove top indicator lights work and the oven light. This indicates that the 120 volt supply is good and that is what powers the control board.
Since you heard a POP you may be able to visually find the problem as it sounds like something shorted out and probably blew the control board.
Unplug the unit.
Check both oven elements for bubbles/blow out in the ceramic coating.
If OK
Remove the back and check the wiring.
If OK
Check the control board itself.
If you cannot find the problem then I would replace the control board.
It would be a good idea to check that the oven elements are not grounded before doing this.
Check from each side of the elements to Neutral/ground.