Model Number: EIFLW55HIWO
Brand: Electrolux
Age: 1-5 years
I have a Electrolux washing machine model EIFLW55HIWO. I've had intermittent E58 errors
Did a test of the motor and measured 3.4 ohms across motor pins 1-2, 1-3, 2-3. Measured 116 ohms across pins 4-5. Motor spins freely as does the tub. So i assumed motor is good.
Troubleshooting checklist says if motor is good then replace motor control board. So thats what I did. Replaced motor control board and now I have E59 error. Measured motor again and have same ohm readings. Put old motor control board back and still have error.
What am I missing? is it possible the new motor control board is bad to or is there something else I should check. This is getting frustrating.
Thanks for any insight you can share.
Tim