controls on GE Range jgb800dep2cc

[Mich]

Model Number: jgb800dep2cc
Brand: GE
Age: 6-10 years

The bake and broil buttons on the control are not working well. I have to press it a lot of times until I get it in the exact spot that it will respond. Any idea how I can fix this?

[denman]

You could try cleaning the keys with electronics cleaner or isopropyl alcohol.
Juts be sur that all the vapors have dissipated before re-applying power to it.

Odds are that the control board will have to be replaced.
https://partsdr.com/part/wb27k10245-oven-control-board

The overlay may also have to be replaced.
https://partsdr.com/part/GEHWB27K10330

I see that it is out of stock so it may not be available.

Often they are glurd to the control with double sided tape.
Be very gentle and careful removing it just in case it is not available.
Sometimes heating it up with a hair dryer helps.

[Mich]

Would it help to change just the overlay and the control board? The computer itself is working. Only the buttons are the issue.

[denman]

Looks to me that the control board and the computer are the same thing.

If you look at the picture of the control board you can see the keys.