Results 1 to 2 of 2

Thread: Samsung Dryer stopped heating

  1. #1

    Samsung Dryer stopped heating

    Model Number: DV365ETBGWR/A3
    Brand: Samsung
    Age: 1-5 years

    The dryer stopped heating. I replaced the Thermostor, thermostat and the heating element. After replacing the heating element and the thermostat it heated for about 30 minutes. Now the screen shows the cooling light always on and no more heat. When it did start heating the side of the dryer got very hot. I am not sure if that is normal or not.

    Thanks,
    Scott

  2. #2
    Doc
    Join Date
    Mar 2016
    Posts
    709
    The following site has a service manual.
    https://drive.google.com/drive/folde...jF3MTA4T0lxb28

    Unplug the unit and both wires from the heating element.
    Check across the heating element, most are in the 8 to 12 ohm range.
    Then check from each side of the element to it's case, both should be infinite ohms. If not the element is grounded and should be replaced.

    Also check the safety thermostats, all should be 0 ohms.

    There is a possibility that the control board is toast. Perhaps a bad element took it out or it just went bad on it's own.

Similar Threads

  1. Replies: 1
    Last Post: 03-13-2017, 12:29 PM
  2. Samsung dryer stopped heating and now stops running.
    By Luvmyssgt in forum Dryer Repair
    Replies: 1
    Last Post: 04-18-2016, 04:57 PM
  3. Samsung Dryer not heating
    By djbilo in forum Dryer Repair
    Replies: 1
    Last Post: 01-21-2013, 08:00 PM
  4. Samsung Dryer not heating
    By mruhmel in forum Dryer Repair
    Replies: 1
    Last Post: 01-10-2013, 08:38 PM
  5. Replies: 12
    Last Post: 01-09-2013, 09:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •