Model Number: DV42H5200EP/a3
Brand: Samsung
Age: 1-5 years

I'm having an issue with the dryer not heating. I have taken it apart and checked the following:

checked voltage at terminal and receiving 240v across both lives and 120 separately to neutral.
heating element: roughly 9.5 ohms, continuity checks good. (single element)
*I checked voltage at each leg of the element with dryer running and was getting 120v per leg (red and blue)
Checked thermistor and its roughly at 9kohms at 76F
Checked thermostat 1, 2, & 3 and all have continuity and less than 1 ohm

I'm out of ideas any help. Shouldn't the heating element heat up if it's receiving 120v per leg (red and blue)