Results 1 to 2 of 2

Thread: Broil element

  1. #1

    Broil element

    Model Number: Cgeb27s7cb2
    Brand: Frigidaire
    Age: More than 10 years

    The top element (broil) still does not work after replacing it with a new one.

  2. #2
    Doc
    Join Date
    Mar 2016
    Posts
    709
    Did you check that the element was OK before installing it.

    If not then I would do that, it should be in the 15 to 20 ohm range.

    If it is OK then odds are that the control board is toast. Unfortunately it looks like this board is discontinued.
    You will have to find a used one (always a risk), get yours repaired or get a new oven.

Similar Threads

  1. GE Profile - replace element with higher wattage element
    By netsecguy in forum Range, Oven, & Cooktop Repairs
    Replies: 1
    Last Post: 06-30-2017, 06:36 AM
  2. Frigidaire Bake/Broil stopped working
    By mbeck73 in forum Range, Oven, & Cooktop Repairs
    Replies: 1
    Last Post: 07-12-2016, 01:05 PM
  3. Replies: 5
    Last Post: 11-11-2013, 03:09 PM
  4. oven do not heat up bake or broil
    By calnat in forum Range, Oven, & Cooktop Repairs
    Replies: 3
    Last Post: 11-16-2012, 09:10 AM
  5. How to tell if bake and broil elements are bad or is it control panel?
    By Eileen Shanley in forum Range, Oven, & Cooktop Repairs
    Replies: 6
    Last Post: 08-30-2012, 10:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •