Results 1 to 3 of 3

Thread: Cant read digital clock or timer

  1. #1

    Cant read digital clock or timer

    Model Number: FTQ352IWUX 03
    Brand: Samsung
    Age: 6-10 years

    am getting ready to purchase this part from you for my Samsung stove but I had a quick question. Everything is working properly on my stove except for the digital readout of the clock and timer. My current touchpad membrane works fine....all the buttons work the oven works great I just can't read the clock. Is this the part I need to fix that?

    I can read the temp right above it...just not the clock. Is the touchpad membrane switch what I need to fix this?

    I found the part but its $100 so I want to make sure.

    Thank you

    Samsung model # FTQ352IWUX 03
    Part # DG34-00007A

  2. #2
    Doc
    Join Date
    Mar 2016
    Posts
    709
    I do not think this is what you need unless you cannot see the numbers because the plastic is discolored.

    Looks to me that this is just the keypad and the digital readout shines through clear areas on it.
    You would need the control board which has the digital display on it.

    I think it is a DG97-00114K but cannot find a picture of it to confirm this.

    Note: There are companies out there that repair appliance timer/clocks/control boards.
    Last edited by denman; 11-30-2019 at 01:51 PM.

  3. #3
    You are correct on the part I need. After a lot more research....I need part # DG97-00114K. And I cant find it anywhere. I'm probably better off buying a new range

Similar Threads

  1. Replies: 1
    Last Post: 08-16-2019, 11:20 PM
  2. Jenn Air clock/control failure
    By bobdabuilder in forum Range, Oven, & Cooktop Repairs
    Replies: 0
    Last Post: 08-14-2018, 06:14 PM
  3. Turning on oven light turns off digital display
    By Tdelta in forum Range, Oven, & Cooktop Repairs
    Replies: 9
    Last Post: 06-29-2012, 01:56 PM
  4. Do I need a new control/clock panel
    By brandy77 in forum Range, Oven, & Cooktop Repairs
    Replies: 3
    Last Post: 10-14-2011, 11:29 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •