Results 1 to 3 of 3

Thread: [FIXED] Whirlpool WRB322DMBM00 Refrigerator- the Freezer section is too cold -20F

  1. #1

    [FIXED] Whirlpool WRB322DMBM00 Refrigerator- the Freezer section is too cold -20F

    Model Number: WRB322DMBM00
    Brand: Whirlpool
    Age: 1-5 years

    Initially, I found a block of ice (since melted away with a hair dryer) around the area of the freezer thermostat. (see picture)

    I have replaced the control board, the freezer thermistor, and the defrost thermostat. I have cleaned the condenser coils, the drain connection, and performed the tests using the controller test protocol (at least those that I have been able to find). I measured the defrost heater at about 31 ohms, and tested with my finger (burned) during manual defrost. I also measured the refrigerator thermistor and it appeared to be correctly tracking. The evaporator was not heavily frosted over (see picture). There is no change in the way it is operating, still too cold (ice cream is rock hard). The fresh food section is at about 37F.

    It passed the following tests:
    1. Defrost Thermostat Diagnostics
    2. Refrigerator Compressor & Condenser Fan Diagnostics
    3. Freezer Evaporator Fan Diagnostics
    4. Refrigerator Sensor Diagnostics
    5. Freezer Sensor Diagnostics
    6. Refrigerator Damper Door Diagnostics

    I am completely frustrated with this issue. The refrigerator is only about 2.5 years old.

    Thanks for any ideas on this.

    Attached Thumbnails Attached Thumbnails Block of ice inside freezer of whirlpool WRB322DMBM00.JPG  
    Last edited by Rick5331; 04-25-2018 at 09:43 PM.

  2. #2
    I found the problem. I initially replaced the freezer thermistor, when that didn't work I replaced the controller board, still didn't work. I found the pinout for the controller chip and measured the resistance of the freezer and fresh food thermistor from the board connectors. The fresh food thermistor measured ok, around 10k-11k at room temp. but the freezer thermistor (the one that I had replaced) was way too low so the (new) controller thought that the freezer was always too warm, making it way too cold. I reinstalled the original freezer thermistor and it worked like a champ! The original problem was caused by the controller board. The replacement freezer thermistor was a red herring (either defective or they sold me the wrong part).

  3. #3
    Admin/Technician Doc Ryan's Avatar
    Join Date
    Mar 2011
    South Dakota
    Glad to hear you figured out the problem! I updated the status to FIXED.
    Ryan - Discount Appliance Parts & Accessories

    Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.

    Circle Parts Dr On Google+

    "Like" Parts Dr on Facebook

    Follow Parts Dr on Twitter

Similar Threads

  1. Refrigerator & Freezer Not Cold, Freezer Coils Frozen
    By jburke0000 in forum Refrigerator or Freezer Repair
    Replies: 2
    Last Post: 10-26-2017, 08:10 PM
  2. GE Profile Refrigerator - Freezer not cold enough
    By ctuerpe in forum Refrigerator or Freezer Repair
    Replies: 0
    Last Post: 01-02-2017, 12:16 PM
  3. Refrigerator Section Getting to cold
    By whlogan in forum Refrigerator or Freezer Repair
    Replies: 3
    Last Post: 08-15-2014, 05:03 PM
  4. GE Profile refrigerator- refrigerator not cold enough and freezer too cold
    By coudamau in forum Refrigerator or Freezer Repair
    Replies: 5
    Last Post: 05-12-2014, 09:18 PM
  5. GE Refrigerator Fresh food section too cold
    By TJDew in forum Refrigerator or Freezer Repair
    Replies: 1
    Last Post: 01-16-2012, 10:57 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts