Results 1 to 2 of 2

Thread: Samsung dryer HE fault

  1. #1

    Samsung dryer HE fault

    Model Number: DV45H6300EG/A3
    Brand: Samsung
    Age: 6-10 years

    Hey guys first time poster here. I am having a problem with my Samsung dryer. After powering on the dryer without even trying to run it I will get a error code HE. So I pulled the plug for 5 mins to try and reset it. After that I pulled the panel off the back and checked each leg where power is going in and I have 120v 120v and then 240. after checking that I then pulled out the heater element and checked the Heater resistance pin 2-3 13ohms, pin 1-2 34 ohms. I then checked Thermostat 2 resistance and got 1 ohms, then I checked the Thermostat 3 and got 1 ohm. I also checked all three for continuity and all three had it. I am wondering what else is there for me to check? I think I checked everything and everything tested out good but im still getting the fault within a min of being powered on. I also just had all my vents and air ducts in the house cleaned on tues. thanks in advance for your help guys.

  2. #2
    Update tested the thermistor and am getting 150+ ohms will that still cause the HE fault? im replacing that later today once it comes in the mail is there anything else I should look at?

Similar Threads

  1. Help!! Maytag gas dryer fault code F23
    By Tosh in forum Dryer Repair
    Replies: 1
    Last Post: 06-24-2018, 12:45 AM
  2. fault code
    By chefs1953@gmail.com in forum Range, Oven, & Cooktop Repairs
    Replies: 0
    Last Post: 05-22-2017, 06:57 AM
  3. Fault Codes Needed
    By wbg in forum Dishwasher Repair
    Replies: 12
    Last Post: 10-04-2015, 10:29 PM
  4. Fault code
    By Aussie in forum Washer Repair
    Replies: 8
    Last Post: 03-18-2013, 06:20 PM
  5. fault code
    By happy appliance in forum Washer Repair
    Replies: 2
    Last Post: 03-06-2013, 10:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •