Results 1 to 4 of 4

Thread: Lights wrk but won’t start

  1. #1

    Lights wrk but won’t start

    Model Number: MDC4650AWB
    Brand: Maytag
    Age: 6-10 years

    Everything lights up in control pad except the start functioning won't even start cycle . Any possible help would be appreciated.

  2. #2
    Doc
    Join Date
    Mar 2016
    Posts
    709
    Below is a service manual
    https://drive.google.com/drive/folde...1ZxdzBFRkNmUEE

    Convertible Dishwasher
    16026945 Mayta...

    I am assuming that you have already unplugged the unit for a couple minutes to see if it will reset.

    I cannot find the tech sheet for this unit. It may be taped under the unit.
    If you can find it, it may give the pin outs for the control panel which would let you check the start button on the panel.

    I would also check that both door switches close. Yo will need a meterto do this correctly.

  3. #3
    Thank you for the reply Yes I did unplug a few times to try to reset, I’ve also look for tech sheet and was also unable to find it online or on the unit. I had replaced the door switches also since it was thought to be that but still no lights on start button and not starting.

  4. #4
    Doc
    Join Date
    Mar 2016
    Posts
    709
    Try asking for it on ApplianceJunk.com.

    There is a guy there that finds almost all tech info.

Similar Threads

  1. [FIXED] Maytag dishwasher-No start w/ blinking lights
    By mongoman7071 in forum Dishwasher Repair
    Replies: 7
    Last Post: 03-10-2015, 10:39 AM
  2. lights come on but won't start
    By oldskool55 in forum Dishwasher Repair
    Replies: 1
    Last Post: 09-05-2013, 10:59 AM
  3. [FIXED] installing start kit 8201786 Do I need a start relay as well?
    By ddaytona1 in forum Refrigerator or Freezer Repair
    Replies: 16
    Last Post: 08-13-2013, 08:15 PM
  4. Replies: 1
    Last Post: 09-03-2012, 09:59 AM
  5. Whirlpool Dryer will no start with start button
    By robert_star123 in forum Dryer Repair
    Replies: 1
    Last Post: 03-09-2012, 05:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •