Model Number: 110.63912100
Brand: Sears Kenmore
Age: More than 10 years
Model Number: 110.63912100
Brand: Sears Kenmore
Age: More than 10 years
My Kenmore Series 90 (model 110.63912100) dryer keeps tripping the thermal cut-off fuse - I'm at a loss and would appreciate any help or suggestions (certainly up to letting this dryer go). When I replace the cut-off fuse, the dryer will run for a couple to dozen loads and then trip the fuse again. I have replaced the dryer vent hood and dryer vent hose, and made sure there is good airflow from the dryer out. I have replaced the cut-off fuse, high limit thermostat, heating element and cycling thermostat. The thermal fuse shows continuity so I haven't replaced that. I have pulled the blower motor and the vent pipe to the exterior and cleared it of lint with a shop vac and compressed air. I vacuumed the inside of dryer with everything removed. I have not tested the line coming in for 220 because I get heat with a new cut-off fuse but then it trips so I thought maybe it ruled that out? My wife thanks you for the help, she insists she wants a new vehicle before a dryer.