Model Number: 592-89157 01
Brand: Sears Kenmore
Age: 6-10 years

Hi everyone,

I seem to have the problem described here:

http://forum.partsdr.com/showthread....t-stay-running

I tried everything described there, but it didn't work.

Basically, none of the dryer functions on the left (Sensor Dry) works. The timed dry side works fine.

Here is the scenario:

I put something to dry at Delicates (on Sensor Dry). I start drying, it shows me it will take 27 minutes. Works a bit, then it gets to 26 minutes. Works another bit, then...it shows 1 minute left, and i believe it stops generating heat. The drum is rolling. After 1 minute, the cycle is finished.

I tried to run the dryer with the vent pipe disconnected - it still does it. The vent is clean, i can see through it.

Some history, which might be useful:

A. A while a go, by mistake, i ran a load without putting the lint filter - took it out to clean, then forgot. After the dry cycle finished, i noticed that. Looked inside - sone lint, and a sock stuck in there Cleaned everything, took the sock out. Dryer worked fine months after.

B. I used the dryer, several times, to dry my daughter's sandals, with Rack Dry option. A guy on youtube is claiming that the moisture sensor bars can get damage if drying shoes.

Please suggest something...Should i start by replacing moisture sensor bars ?

Thanks