Results 1 to 3 of 3

Thread: Maytag 9000 getting F28 error code

  1. #1

    Maytag 9000 getting F28 error code

    Model Number: MHWE950WW02
    Brand: Maytag
    Age: 6-10 years

    I understand that this code is a communication error from the CCU to the MMU boards, but I also understand that the Water Conrol Sensor can cause this issue as well. Any assistance would be appreciated. Thanks

  2. #2
    I am assuming that you have already unplugged the unit for a few minutes to see if it will reset.

    Below is a link to a page on another sire which has a tech sheet for this unit just in case you do not have it.
    https://www.appliancejunk.com/forums...82652#msg82652
    You may have to join the site to down load the tech sheet.

    Check the wires and connectors between the two devices.

  3. #3

    Maytag 9000

    Quote Originally Posted by denman View Post
    I am assuming that you have already unplugged the unit for a few minutes to see if it will reset.

    Below is a link to a page on another sire which has a tech sheet for this unit just in case you do not have it.
    https://www.appliancejunk.com/forums...82652#msg82652
    You may have to join the site to down load the tech sheet.

    Check the wires and connectors between the two devices.
    I have unplug the unit many times including overnight. I have check wires and sprayed with connector cleaner. I have replace the door latch switch. Have tried a new MMU control and still receive an F28 message. I can turn the machine on and it goes to the point of locking the door and then it sits idle for about 5 minutes and then gives the F28 error message. Some mentioned that the Water sensing control may think there is water in the tub not allowing it to move to a fill mode. This little sensor costs about $119 and I don't want to replace it unnecessarily. Help!

Similar Threads

  1. 14 E error code
    By alexpro in forum Refrigerator or Freezer Repair
    Replies: 0
    Last Post: 10-29-2018, 11:26 AM
  2. error code i20
    By Chipkiller in forum Dishwasher Repair
    Replies: 0
    Last Post: 01-28-2016, 12:31 PM
  3. Replies: 0
    Last Post: 07-03-2015, 02:01 PM
  4. error code co
    By gilbyg in forum Dishwasher Repair
    Replies: 1
    Last Post: 05-20-2014, 02:48 PM
  5. maytag bravos washer sd error code
    By gregaguilar in forum Washer Repair
    Replies: 1
    Last Post: 06-11-2013, 11:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •