Results 1 to 2 of 2

Thread: Dryer motor rewing instructions Maytag 10411000

  1. #1
    Patient
    Join Date
    May 2019
    Location
    Waterloo, Ontario
    Posts
    1

    Dryer motor rewing instructions Maytag 10411000

    Model Number: SE9900
    Brand: Maytag
    Age: More than 10 years

    Maytag Dryer over and under combo model SE9900
    Original dryer motor 3-6055-1 model S58NXJAJ-5118
    Replacement W10411000 ordered
    Actual received P/N W10410893 model S58SVJAJ-7127
    The original motor terminal block has 4 coloured wires, Blue, Black - switch on the 220v heater when motor runs. Red, Gray power the motor with 110V.
    Various similar internet instructions suggest to the new terminal block
    Red -> 5
    Gray-> 4
    Black-> 2
    Blue -> 1
    and Yellow (which I don't have) -> 6 ????
    Can I ignore wiring to 6 or does it need a jumper. I don't know it's function.
    And can the other connections be confirmed.
    Whirlpool Canada will only give out the (re)wiring info to certified Whirlpool technicians, and no instructions were included in the new box.
    Thanks for any help you can give.

  2. #2
    Hello,

    I wanted to ask you about your motor and if you found out where the yellow wire connected to? I found a manual to a similar motor and their manual says yellow to number 6 but i just wanted to be sure please?

Similar Threads

  1. Maytag maxima dispenser motor and switch
    By Liz in forum Washer Repair
    Replies: 0
    Last Post: 03-18-2019, 10:59 AM
  2. [FIXED] Maytag Dishwasher humming motor, drains, and shuts down
    By Timothy Lindsay in forum Dishwasher Repair
    Replies: 2
    Last Post: 12-23-2016, 11:49 AM
  3. Maytag Dryer Needs New Motor
    By JoeToe in forum Dryer Repair
    Replies: 1
    Last Post: 04-30-2015, 10:52 AM
  4. dryer motor issue
    By awgraham in forum Dryer Repair
    Replies: 5
    Last Post: 11-18-2014, 03:32 PM
  5. [FIXED] Maytag Neptune motor control board replacement
    By retiredguy in forum Washer Repair
    Replies: 3
    Last Post: 11-13-2013, 04:08 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •