Results 1 to 1 of 1

Thread: Kitchenaid Wall Oven Will Not Process Temperature Changes

  1. #1

    Kitchenaid Wall Oven Will Not Process Temperature Changes

    Model Number: KEBS209BWH00
    Brand: KitchenAid
    Age: 1-5 years

    Double wall oven will heat to the initial temperature in both ovens - say 350. Only a few degrees off using an external digital probe.

    If you attempt a temperature change - to say 375 - oven display immediately shows 305 to 320 and goes into preheat mode. Temperature does climb to past 375 and oven continues to show preheat and the display never gets above about 345 / 355 even through the actual temp is 388 - 390 and continuing to climb.

    This is both ovens.

    Temperature probe in upper over was replaced about a year ago. Control board (internal not the display board) was just replaced and both ovens exhibits the exact same problem

    Adding that there is no foil or or there items in the oven.

    Any thoughts are greatly appreciated.
    Last edited by RogerCA; 11-27-2019 at 12:26 PM.

Similar Threads

  1. Replies: 1
    Last Post: 10-15-2019, 09:07 AM
  2. Frigidaire wall oven sometimes wont light
    By mlr1951 in forum Range, Oven, & Cooktop Repairs
    Replies: 1
    Last Post: 07-09-2019, 05:35 AM
  3. Jen Air Wall Oven control clock doesn't go on
    By sdykema in forum Range, Oven, & Cooktop Repairs
    Replies: 1
    Last Post: 01-10-2019, 06:52 AM
  4. Kitchenaid Over Temperature display blinking/beeping when temp is fine
    By WBarnard in forum Refrigerator or Freezer Repair
    Replies: 0
    Last Post: 12-18-2018, 01:22 PM
  5. wall oven touch pad
    By dj4 in forum Range, Oven, & Cooktop Repairs
    Replies: 1
    Last Post: 02-24-2012, 12:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •