Results 1 to 5 of 5

Thread: how to disconnect ribbon from Jennair JES9800AAB control panel

  1. #1

    how to disconnect ribbon from Jennair JES9800AAB control panel

    Model Number: jes9800aab
    Brand: Jenn-Air
    Age: 6-10 years

    How do you disconnect the ribbon from the JES9800 Jennaie oven control panel from the board ( on the clock). I have tried to pry it up and no luck. Is there something I am not doing right?

  2. #2
    Admin/Technician Doc Ryan's Avatar
    Join Date
    Mar 2011
    Location
    South Dakota
    Posts
    4,230
    On the black piece that the ribbon cable connects to, you should see two small black tabs that stick out the left and right sides. If you lift up on these, it will release the ribbon cable. Push them back down when you reinstall the ribbon cable.
    Ryan

    PartsDr.com
    - Discount Appliance Parts & Accessories


    Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.

    Check out our Repair Videos on Youtube

    "Like" Parts Dr on Facebook


    Follow Parts Dr on Twitter

  3. #3
    black tab on right side missing but even pulling up on left side did not seem to loosen the black piece that connects the ribbon . Any other suggestion?

  4. #4
    black tab on right side missing but even pulling up on left side did not seem to loosen the black piece that connects the ribbon . Any other suggestions as to how to disconnect ribbon

  5. #5
    Admin/Technician Doc Ryan's Avatar
    Join Date
    Mar 2011
    Location
    South Dakota
    Posts
    4,230
    I think the missing tab might be your problem. You have to lift both tabs up to release the ribbon cable.
    Ryan

    PartsDr.com
    - Discount Appliance Parts & Accessories


    Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.

    Check out our Repair Videos on Youtube

    "Like" Parts Dr on Facebook


    Follow Parts Dr on Twitter

Similar Threads

  1. [FIXED] Front display panel issue on GSL25XGWASS
    By CyberWheelPR in forum Refrigerator or Freezer Repair
    Replies: 6
    Last Post: 03-27-2023, 01:15 PM
  2. [FIXED] JennAir F1-07 fault code
    By dlmoorevmd in forum Range, Oven, & Cooktop Repairs
    Replies: 53
    Last Post: 11-19-2019, 02:56 PM
  3. Replies: 1
    Last Post: 09-03-2012, 09:59 AM
  4. How to tell if bake and broil elements are bad or is it control panel?
    By Eileen Shanley in forum Range, Oven, & Cooktop Repairs
    Replies: 6
    Last Post: 08-30-2012, 10:54 AM
  5. Do I need a new control/clock panel
    By brandy77 in forum Range, Oven, & Cooktop Repairs
    Replies: 3
    Last Post: 10-14-2011, 11:29 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •