Results 1 to 1 of 1

Thread: Samsung dryer main control board terminal burning out

  1. #1

    Samsung dryer main control board terminal burning out

    Model Number:
    Brand: Brand
    Age: Less than 1 year

    Model Number: dv328aew-xaa
    Brand: Samsung
    Age: 1-5 years

    Hello, recently my Samsung DV328AEW-XAA dryer stopped heating up, but still tumbled. I bought a new heating element kit, replaced the heating element, thermal fuse, thermistor, and thermostat. Still no luck after that, so I replaced the main control board (MFSDV327L00) next. That is when I noticed that the original board had a burnt out and melted terminal where one of the wires that runs to the heating element connects. After replacing the board, the dryer was running and heating up just fine. I got a few loads done until later that day when I come to find I have no heat again. I looked at the board, and the same terminal is burnt out again.

    I'm thinking this indicates a short in the wiring somewhere? Or maybe the signal to turn off the heat is not properly reaching the main board? I'm not sure, any help would be appreciated! I'll get a picture to show you exactly what is burning out.

    Thank you! I appreciate all help, this forum helped me troubleshoot up until this point but I'm not sure what the next move is.

    Click image for larger version. 

Name:	IMG_20200531_102222.jpg 
Views:	3 
Size:	56.2 KB 
ID:	903
    Click image for larger version. 

Name:	IMG_20200531_102239.jpg 
Views:	2 
Size:	73.3 KB 
ID:	904
    Last edited by PalmTrixx; 05-31-2020 at 09:27 AM.

Similar Threads

  1. Replies: 0
    Last Post: 11-27-2019, 09:51 AM
  2. Main Control Board
    By SJSJSJ in forum Refrigerator or Freezer Repair
    Replies: 0
    Last Post: 07-24-2019, 10:01 AM
  3. Samsung Dryer with main board issues
    By thomaszr in forum Dryer Repair
    Replies: 2
    Last Post: 01-08-2016, 09:41 AM
  4. GE replaced main control board, temperature control not working
    By Kcnsfryer in forum Refrigerator or Freezer Repair
    Replies: 5
    Last Post: 01-27-2015, 11:46 AM
  5. Advice about installing the main control board of a GE Monogram ZIC36N/freezer on bot
    By helpmehelpme in forum Refrigerator or Freezer Repair
    Replies: 2
    Last Post: 01-02-2014, 09:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •