Model Number: GDF610PGJ2BB
Brand: GE
Age: 1-5 years
Control panel lights up and accepts settings. START lamp lights up, but unit does not fill.
I am trying to determine if flood switch assembly (part # WD21X10519) is stuck in the upper position. The online GE docs say to pull up on the assembly to remove it, but that's not possible because it's held in place by two screws. I am hesitant to remove the screws because I don't know if there might be some cautions associated with doing this.
It is difficult to see inside the assembly when installed, but it looks like there is a center post that the float might ride up and down on; however, I would expect to see some kind of float at the bottom of the post, but I can't. I suspect the float might be stuck in the upper half of the assembly. I have tapped on the assembly and probed thru the slots, but haven't encountered anything that moves.
I also suspect it might be the door switch, but I am starting with the float because removal of the door switch does not look to be easy.
Any help would be appreciated.
Thanks