Model Number: WPXH214A0WW
Brand: GE
Age: More than 10 years
GE WPXH214A0WW (Frigidaire Front Loader post 1998 model)
Machine Number: WPXH214A0WW
I have a unit that is non functioning. Since the unit would not enter "high speed" spin, I assumed it was the door switch. I installed a new switch, while the unit did not function correctly, it did perform differently.
Moving on, I replaced the timer mechanism since I had one. Again, did not function properly, it did act differently.
The symptoms (with both new parts installed)
The system will begin a cycle by filling the drum and tumbling.
It does not seem as if the timer mechanism does NOT advance, therefore it never finishes a cycle.
In the service manual I have on this machine, there are no "proving parts as good" only coil resistances.
I have worked on several of these and haven't had a problem with them. I must have a sensor of contact or other not good, so the cycle dies.
Any help is appreciated.