Model Number:
Brand: Whirlpool
Age: 1-5 years

I suspected that when the Whirpool stopped drying that the
igniter went bad. I looked through the front "peep hole"
and found the igniter was fine, the burn looked clean and
blue with some streaks of yellow. After about 1 minute
a "click" was heard and flame went out, not to ignite again.
I powered off and waited about 10 minutes and started the
dryer again and it worked as before.
I suspect that either a thermostat or safety cut off went bad.

Are there any other suspects?

Thanks
George