Results 1 to 7 of 7

Thread: programming control panel

  1. #1

    programming control panel

    Model Number: EB9SHKXVQ01
    Brand: Whirlpool
    Age: 1-5 years

    I just replace control panel 12868513 and display is not lighting up so I can't program it?

  2. #2
    Admin/Technician Doc Ryan's Avatar
    Join Date
    Mar 2011
    Location
    South Dakota
    Posts
    3,540
    What was the problem with the original control board?
    Ryan
    www.PartsDr.com - Discount Appliance Parts & Accessories

    Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.

    Circle Parts Dr On Google+

    "Like" Parts Dr on Facebook


    Follow Parts Dr on Twitter

  3. #3

    new control panel

    Quote Originally Posted by Doc Ryan View Post
    What was the problem with the original control board?
    The fridge side would not get below 45 degrees even set at seven, I installed a new control panel but couldn't get it to boot up. thank you, Andy

  4. #4
    Admin/Technician Doc Ryan's Avatar
    Join Date
    Mar 2011
    Location
    South Dakota
    Posts
    3,540
    Did you try plugging the old control board back in to see if it works okay? Did you double check the electrical connections to make sure they are in the correct place and not off by a pin?
    Ryan
    www.PartsDr.com - Discount Appliance Parts & Accessories

    Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.

    Circle Parts Dr On Google+

    "Like" Parts Dr on Facebook


    Follow Parts Dr on Twitter

  5. #5
    The old control panel is back in and still only 45 degerees, connections are and were in the right place. thank you, Andy

  6. #6
    Admin/Technician Doc Ryan's Avatar
    Join Date
    Mar 2011
    Location
    South Dakota
    Posts
    3,540
    I would trying installing the new board one more time, just to make sure. If it still isn't working, then the new part is probably defective. If you ordered the part from us, you will need to fill out the defective part form on this page and we will get it taken care of for you.
    Ryan
    www.PartsDr.com - Discount Appliance Parts & Accessories

    Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.

    Circle Parts Dr On Google+

    "Like" Parts Dr on Facebook


    Follow Parts Dr on Twitter

  7. #7
    OK will do. thank you, Andy

Similar Threads

  1. how to disconnect ribbon from Jennair JES9800AAB control panel
    By BBWW2 in forum Range, Oven, & Cooktop Repairs
    Replies: 4
    Last Post: 11-09-2012, 10:20 AM
  2. [FIXED] Front display panel issue on GSL25XGWASS
    By CyberWheelPR in forum Refrigerator or Freezer Repair
    Replies: 5
    Last Post: 11-01-2012, 10:22 AM
  3. Replies: 1
    Last Post: 09-03-2012, 10:59 AM
  4. How to tell if bake and broil elements are bad or is it control panel?
    By Eileen Shanley in forum Range, Oven, & Cooktop Repairs
    Replies: 6
    Last Post: 08-30-2012, 11:54 AM
  5. Do I need a new control/clock panel
    By brandy77 in forum Range, Oven, & Cooktop Repairs
    Replies: 3
    Last Post: 10-14-2011, 12:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •