Model Number: CYE22USHESS
Brand: GE
Age: 1-5 years

Icemaker / Dispenser works for the most part, but every few days I have to remove the bin and chip or melt off the melted and re-frozen cubes, frozen to the front inside of the bin.

Have determined that, when tray fills, water is splashing / spraying outside of tray, Including into the ice bin. I can see this happening when the tray fills. Clearly this is the problem. But what is the fix?

From what I can see, without dismantling, it does not appear that there is any obstruction to the tray water fill “port.” The water flow into the tray does appear to be a little inconsistent, varying in strength and amount, and I can see water that’s NOT going into the tray.

Is it possible or likely that the solenoid or the water pressure could be causing this? Seems unlikely to me.

Don’t know if this is important, but we have no water filter installed, just the bypass plug. This is because our water is supplied by our distiller.

Appreciate any help.