Search:

Type: Posts; User: Doc Ryan

Page 1 of 20 1 2 3 4

Search: Search took 0.11 seconds.

  1. Replies
    1
    Views
    83

    This is usually caused by a bad water inlet...

    This is usually caused by a bad water inlet valve. See the link below.

    Water Inlet Valve - WP8181694
    https://media.partsdr.com/regular/WPL8181694.jpg
  2. Replies
    1
    Views
    120

    On the back side of the kickplate of the...

    On the back side of the kickplate of the dishwasher is a wiring diagram that might give you some of that information.
  3. Replies
    5
    Views
    180

    Great to hear! Yes, that is what is sounds like...

    Great to hear! Yes, that is what is sounds like to me.
  4. Replies
    3
    Views
    110

    I think your analysis is spot on. Let us know...

    I think your analysis is spot on. Let us know how the repair goes for you if you end up doing it at some point.
  5. Replies
    3
    Views
    110

    Hi Dean, Usually the only other thing that...

    Hi Dean,

    Usually the only other thing that will cause these washers to get out of balance is the bearings in the gearcase going bad. When the gearcase bearings fail, the tub will not spin...
  6. Which part number was replaced? What was the...

    Which part number was replaced? What was the original problem with the freezer?
  7. Yes, it is the refrigerator section temperature...

    Yes, it is the refrigerator section temperature control thermostat.
  8. The door switches are most likely good. It...

    The door switches are most likely good. It sounds like the freezer door switch is probably normal open and has continuity when the switch is open. We have a video below that goes more in depth on...
  9. Replies
    2
    Views
    542

    Thank you for posting the solution!

    Thank you for posting the solution!
  10. Replies
    2
    Views
    99

    Usually those types of symptoms would be caused...

    Usually those types of symptoms would be caused by a failure of one of the control boards. You replaced both of them with new boards and it still acts the same?
  11. Replies
    5
    Views
    180

    I think next you would next to take the...

    I think next you would next to take the dishwasher apart to do a visual inspection to see if you can see anything broken.
  12. On these dryers there usually is not a way to...

    On these dryers there usually is not a way to further narrow down which of the two board is bad (or both). You usually end up having to make an guess or replace them both.
  13. If you keep the dryer on, does the time continue...

    If you keep the dryer on, does the time continue to count down from 20 minutes?
  14. Behind that cover is the damper control assembly....

    Behind that cover is the damper control assembly. The damper has a door that opens and closes to control the cold air from the freezer compartment into the refrigerator compartment. If this part is...
  15. That model number is missing a digit. I would...

    That model number is missing a digit. I would start by inspecting the wiring coming out of the top of the left door for broken wires.


    https://www.youtube.com/watch?v=fg5XMbpUjDg
  16. According to the wiring diagram, it looks like it...

    According to the wiring diagram, it looks like it could be either the refrigerator temperature control thermostat or the air diffuser assembly causing the issue. Those two parts work together to...
  17. Replies
    1
    Views
    76

    The model number provided is not valid. Click...

    The model number provided is not valid. Click here to view common locations to find the model/serial number tag.
  18. Replies
    5
    Views
    180

    Does the start button still feel like the button...

    Does the start button still feel like the button is being pressed when you press it? This is usually caused by either a failure of the button on the user interface control board or something broken...
  19. We haven't seen any published information from GE...

    We haven't seen any published information from GE on how these systems work yet. It seems like the main wash pump must be what controls the position of the magnet diverter disc.
  20. Replies
    1
    Views
    77

    Sometimes during the manufacturing process, some...

    Sometimes during the manufacturing process, some excess foam leaks into the light housing area and causes the light to stick and not come out easily. Make sure you have the locking clips depressed...
  21. Replies
    1
    Views
    103

    Check the wires coming out of the refrigerator...

    Check the wires coming out of the refrigerator door for any broken wires.

    Check the temperature in the ice maker compartment to make sure it is getting cold enough to produce ice.

    Other things...
  22. Can you narrow down where the noise is coming...

    Can you narrow down where the noise is coming from?
  23. Glad you got it!

    Glad you got it!
  24. Replies
    3
    Views
    168

    They do not produce service manuals for every...

    They do not produce service manuals for every model. Let us know how the repair goes.
  25. Replies
    1
    Views
    398

    That would normally indicate a failure of the...

    That would normally indicate a failure of the control board that supplies power to the bake and broil elements.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4