Search:

Type: Posts; User: Doc Ryan

Page 1 of 20 1 2 3 4

Search: Search took 0.10 seconds.

  1. It should follow the ohm chart below. ...

    It should follow the ohm chart below.



    Temperature
    Resistance


    77°F/25°C
    2700 Ω ± 5.0%
  2. This video might help you out here. We also have...

    This video might help you out here. We also have videos on our Youtube channel that show how to test some of the defrost components.

    https://www.youtube.com/watch?v=OpLI6PTJ4hg
  3. Replies
    1
    Views
    356

    You can view the Whirlpool instruction sheet for...

    You can view the Whirlpool instruction sheet for this part here.

    Just double check that everything is installed properly, but it should work just fine for your dryer. Let us know what you find.
  4. Replies
    3
    Views
    1,614

    It looks like it might be coming from the...

    It looks like it might be coming from the diverter valve. It is pretty common on these dishwashers for the rubber on the diverter valve to degrade over time and cause it to leak. Let us know what...
  5. A clogged or frozen defrost drain can cause this....

    A clogged or frozen defrost drain can cause this. Sometimes it is caused by a failure of a component in the automatic defrost cycle (ie: defrost heater, defrost thermistor, defrost bi-metal, main...
  6. Replies
    2
    Views
    1,449

    When the refrigerator sees the damper failure, it...

    When the refrigerator sees the damper failure, it goes into a safe mode and also stops the freezer from cooling until the code is cleared. I think this is done so things won't freeze in the...
  7. Replies
    1
    Views
    221

    This is usually caused by a bad water inlet...

    This is usually caused by a bad water inlet valve. See the link below.

    Water Inlet Valve - WP8181694
    https://media.partsdr.com/regular/WPL8181694.jpg
  8. Replies
    1
    Views
    332

    On the back side of the kickplate of the...

    On the back side of the kickplate of the dishwasher is a wiring diagram that might give you some of that information.
  9. Replies
    5
    Views
    444

    Great to hear! Yes, that is what is sounds like...

    Great to hear! Yes, that is what is sounds like to me.
  10. Replies
    3
    Views
    353

    I think your analysis is spot on. Let us know...

    I think your analysis is spot on. Let us know how the repair goes for you if you end up doing it at some point.
  11. Replies
    3
    Views
    353

    Hi Dean, Usually the only other thing that...

    Hi Dean,

    Usually the only other thing that will cause these washers to get out of balance is the bearings in the gearcase going bad. When the gearcase bearings fail, the tub will not spin...
  12. Replies
    2
    Views
    297

    Which part number was replaced? What was the...

    Which part number was replaced? What was the original problem with the freezer?
  13. Yes, it is the refrigerator section temperature...

    Yes, it is the refrigerator section temperature control thermostat.
  14. The door switches are most likely good. It...

    The door switches are most likely good. It sounds like the freezer door switch is probably normal open and has continuity when the switch is open. We have a video below that goes more in depth on...
  15. Replies
    2
    Views
    1,127

    Thank you for posting the solution!

    Thank you for posting the solution!
  16. Replies
    2
    Views
    306

    Usually those types of symptoms would be caused...

    Usually those types of symptoms would be caused by a failure of one of the control boards. You replaced both of them with new boards and it still acts the same?
  17. Replies
    5
    Views
    444

    I think next you would next to take the...

    I think next you would next to take the dishwasher apart to do a visual inspection to see if you can see anything broken.
  18. On these dryers there usually is not a way to...

    On these dryers there usually is not a way to further narrow down which of the two board is bad (or both). You usually end up having to make an guess or replace them both.
  19. If you keep the dryer on, does the time continue...

    If you keep the dryer on, does the time continue to count down from 20 minutes?
  20. Behind that cover is the damper control assembly....

    Behind that cover is the damper control assembly. The damper has a door that opens and closes to control the cold air from the freezer compartment into the refrigerator compartment. If this part is...
  21. That model number is missing a digit. I would...

    That model number is missing a digit. I would start by inspecting the wiring coming out of the top of the left door for broken wires.


    https://www.youtube.com/watch?v=fg5XMbpUjDg
  22. According to the wiring diagram, it looks like it...

    According to the wiring diagram, it looks like it could be either the refrigerator temperature control thermostat or the air diffuser assembly causing the issue. Those two parts work together to...
  23. Replies
    1
    Views
    205

    The model number provided is not valid. Click...

    The model number provided is not valid. Click here to view common locations to find the model/serial number tag.
  24. Replies
    5
    Views
    444

    Does the start button still feel like the button...

    Does the start button still feel like the button is being pressed when you press it? This is usually caused by either a failure of the button on the user interface control board or something broken...
  25. We haven't seen any published information from GE...

    We haven't seen any published information from GE on how these systems work yet. It seems like the main wash pump must be what controls the position of the magnet diverter disc.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4