Results 1 to 4 of 4

Thread: Replaced the clock /control module today but the oven still will not heat

  1. #1

    Unhappy Replaced the clock /control module today but the oven still will not heat

    Greetings. I have replaced the clock /control module today but the oven still will not heat. I get only several blinks from the oven or broil light then the clock time appears. No oven heat. Part replaced is Electrolux 316455400. Range model #
    FEF326FQB. Did I install a bad part? Had same problem with origional clock unit.

  2. #2
    Admin/Technician Doc Ryan's Avatar
    Join Date
    Mar 2011
    Location
    South Dakota
    Posts
    3,562
    It is very very unlikely that the new part and old part would have the exact same problem. Do the top burners work correctly?
    Ryan

    PartsDr.com
    - Discount Appliance Parts & Accessories


    Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.

    Check out our Repair Videos on Youtube

    "Like" Parts Dr on Facebook


    Follow Parts Dr on Twitter

  3. #3

    Oven repair job

    Quote Originally Posted by Doc Ryan View Post
    It is very very unlikely that the new part and old part would have the exact same problem. Do the top burners work correctly?
    Inreviewed my work and played with the controls. The old component defaulted at 350 degrees F. The new one reads with four horizontal lines. I then touched the up and down arrows and got a tempeture setting. The broiler hi and low also is selected here. On old unit broiler was instant hi or low with a single touch. All is working only the programming in the unit is a little different.

  4. #4
    Admin/Technician Doc Ryan's Avatar
    Join Date
    Mar 2011
    Location
    South Dakota
    Posts
    3,562
    So it seems to be working correctly, but that it is programmed a little bit different from the original?
    Ryan

    PartsDr.com
    - Discount Appliance Parts & Accessories


    Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.

    Check out our Repair Videos on Youtube

    "Like" Parts Dr on Facebook


    Follow Parts Dr on Twitter

Similar Threads

  1. Replies: 3
    Last Post: 05-19-2013, 09:13 PM
  2. Oven will not heat...
    By UMJLTD in forum Range, Oven, & Cooktop Repairs
    Replies: 1
    Last Post: 03-24-2013, 08:46 PM
  3. hotpoint oven, replaced control now f4, disconect sensor f3?sensor is 16 ohm and good
    By MARK CLIFTON in forum Range, Oven, & Cooktop Repairs
    Replies: 10
    Last Post: 03-01-2012, 09:31 PM
  4. Amana Electric Range replaced bake element won't heat
    By Wyler in forum Range, Oven, & Cooktop Repairs
    Replies: 1
    Last Post: 11-06-2011, 08:51 PM
  5. Do I need a new control/clock panel
    By brandy77 in forum Range, Oven, & Cooktop Repairs
    Replies: 3
    Last Post: 10-14-2011, 11:29 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •