Results 1 to 2 of 2

Thread: Samsung Dryer all vents cleared, "to" comes up on the control and it just shuts off.

  1. #1

    Samsung Dryer all vents cleared, "to" comes up on the control and it just shuts off.

    Model Number: dv328aew/xaa
    Brand: Samsung
    Age: 6-10 years

    I had someone come out and check the unit and all the thermostats as well as the heater have continuity where they are supposed to show a closed circuit. I am not sure the thermister is in range. it did have continuity though. Need advice. Ducts were clogged and have been cleared (witnessed the duct cleaning process). Also cleaned all lint that built up in the machine on heater and all electronics.

  2. #2
    Admin/Technician Doc Ryan's Avatar
    Join Date
    Mar 2011
    Location
    South Dakota
    Posts
    4,812
    The error code you are receiving is most likely a t0, which means thermistor open sensed. The dryer shows this error code when the thermistor resistance is very high. To test the thermistor you will need to unplug the dryer, and remove the thermistor from the dryer and using and Ohm meter to test the thermistor. The thermistor at room temperature should read approximately 10k ohms. If it is far off from that, the sensor will need to be replaced. Let me know what you find.

    This is the thermistor for your dryer:

    Thermistor - PD00001996 (mfg# DC32-00007A)
    Ryan

    PartsDr.com
    - Discount Appliance Parts & Accessories


    Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.

    Check out our Repair Videos on Youtube

    "Like" Parts Dr on Facebook


    Follow Parts Dr on Twitter

Similar Threads

  1. Maytag Neptune washer with "nd" code
    By slivers45 in forum Washer Repair
    Replies: 5
    Last Post: 08-02-2015, 07:15 PM
  2. Replies: 3
    Last Post: 02-20-2015, 01:46 PM
  3. Behavior of "Elite" model is minimal/abnormal, but no components seem bad
    By Bill near Boston in forum Dishwasher Repair
    Replies: 1
    Last Post: 08-01-2013, 04:49 PM
  4. Samsung refrigerator RB1944SL not cooling, error code "d"
    By Lance Greentree in forum Refrigerator or Freezer Repair
    Replies: 1
    Last Post: 08-08-2012, 11:01 AM
  5. "PF" code showing on Frigidaire dishwasher
    By schmidtys311 in forum Dishwasher Repair
    Replies: 4
    Last Post: 07-02-2012, 11:50 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •