Frigidaire oven LP conversion

[CRUISERPHISH]

Model Number: fcrg3083asb
Brand: Frigidaire
Age: Less than 1 year

Hello all I've just purchased a new Frigidaire oven. I have successfully converted the stove top and flipped the cap in the regulator. I cant find how to convert the oven and the flames are 8" coming out of the burner. The only even close videos i can find have the burner bending down 90 degrees and you adjust a nut from behind the stove but this model the burner just sits straight back onto a pipe with no access to it except from the front. the pipe is part number pd00086052 if you'd like to have a look at it. the piece does look like a nut but seems to be solid and just snapped off of the original when i tried to turn it. I'm kind of at a loss . If anyone has any advice I would greatly appreciate it.

[Doc Ryan]

It looks like the LP Conversion Kit for your model that I linked below should have included orifices to convert the oven burners. Is this the part that you used to convert the range?

LP Conversion Kit - GRLP5 (PD00083528)

[CRUISERPHISH]

Thanks, no unfortunately i called frigidaire and they sold me #2319698 but it only included the orifices for the top burners and was over $100. Hopefully this does the trick Thanks again

[Doc Ryan]

That's too bad they sold you the wrong part. Let me know how it works once you get the correct LP conversion kit installed.