Results 1 to 2 of 2

Thread: Water Heater Repair Help

  1. #1

    Water Heater Repair Help

    Model Number: GE50M6A
    Brand: GE
    Age: 16

    I just moved into a house with two 2003 GE GE50M6A water heaters. I tested them with a multimeter and the first one (with the cold water intake) had a bad thermostat. So, just to be safe (and because they are beyond their service life), I changed the upper and lower thermostats and both elements on both of the water heaters.

    I checked the voltage and continuity of everything again, and everything checked out ok - power, thermostat, limit switch, elements. I set all the thermostats to 125 last night. We have hot water at the faucets, however, when I open the bottom drain valve of the first water heater the water that comes out is ice cold. The water coming out of the second water heater bottom drain valve is nice and hot. Any ideas what might be wrong?

    Click image for larger version. 

Name:	IMG_3401.jpg 
Views:	1 
Size:	61.0 KB 
ID:	814

  2. #2
    If you need any help with any type of plumbing repair needs including water heater repair, contact Caliber Plumbing
    Last edited by Aaron Mawardi; 11-29-2022 at 01:59 AM.

Similar Threads

  1. How do I know if it is the defrost heater or Thermometer ?
    By Todd R in forum Refrigerator or Freezer Repair
    Replies: 2
    Last Post: 08-22-2017, 06:05 PM
  2. Kenmore water heater problems
    By Skipmartin in forum General Repair
    Replies: 0
    Last Post: 08-10-2016, 06:47 PM
  3. Samsung ICE maker leaking Water - Parts needed to DIY repair
    By scot01 in forum Refrigerator or Freezer Repair
    Replies: 3
    Last Post: 02-06-2013, 02:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •